Full Product Manual

20
Click refresh reater information button to
refresh the available device list table and see
if the IPC Repeater is still in the list. If you do
not see the repeater (RP1-Auto) in the list,
please repeat the step from the step 2 - 5.
Please check the connection status:
3. AirBridge
1. Go to Video Manage and click the Repeater
button to open the Repeater window.
2. Diagram shows the connected devices.
3. Click on the next to the connected device
to get the drop-down menu.
4. Click on the drop-down menu to select the
channel you want to connect to.
5. Click Apply to save the change.
Wireless Connected
Wired Connected
Wireless Disconnected
Wired Disconnected
If the Auto Repeater is enabled, you will not
be able to congure manually. Please dis-
able(uncheck the check box) to manually
congure.
1. Have the Repeater next to the NVR system and
plug in the power.
2. Wait for 30-40 seconds for the camera to boot.
3. Go to the System setup and click Network >
Camera Network Tap.
4. Click Refresh Repeater Information button to
Add the device.
5. Click RPi-Auto to enter repeater setup and
click Pair Button and ciick Save changes. Now
the IPC Repeater is ready.
• *** If you want to use a cable to Connect the
Repeater to the NVR, Connect the repeater to
the NVR with an Ethernet cable (Cat5e cable).
• Please repeat the step from 1-5. and remove
the Ethernet cable from the IPC Repeater after
completed.