Full Product Manual

22
When an Auto Repeater enabled camera can
not connect to the NVR directly, it will try
to seek a camera or IPC repeater to attach to
and make a connection the NVR through
AirBridge function.
It is very important that you have a good
strong signal and power while setting this
up.
4. Auto Repeater
The Auto Repeater function only works with
Auto Repeater capable cameras such as CVT-
30WB, CVT-35WB , and IPC Repeater.
1. Please try to maintain good signal and con-
stant power with all connected devices.
2. Access the Camera Wireless Network tab from
Network setup page.
3. Make sure that each camera has a good signal.
4. Go to Camera Repeater tab and click Refresh
Repeater information Button if necessary.
5. enable the auto Repeater and click Save
changes.
The Auto Repeater will try to nd the best
connection possible and it may take 1-5 min-
utes depending on the signal strength and
the complexity of the scene.
Ch1 Auto Ch2 Auto
Use with caution. If not satised with the result, please try manual setup (p. 19 - 20).
Please disable(uncheck the check box) Auto Repeater to setup manually.
NVR Camera Ch1 Camera Ch2
Auto Repeater
Check up Camera