Full Product Manual

3
WARNING: To reduce the risk of electric shock do not remove the cover, no user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING: To prevent fire or shock hazards, do not expose the NVR system & power adapters to rain or moisture.
CAUTION: To prevent electric shock, match the wide blade of the plug to the wide slot and fully insert.
In addition to the careful attention devoted to quality standards in the manufacturing process of your product, safety is a major factor in the
design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to ensure your
enjoyment and proper use of the product and accessory equipment. Please read them carefully before operating and using your product.
1. All warnings and instructions in this manual should be followed.
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water-dampened cloth for cleaning.
3. Do not use this product in humid or wet places.
4. Keep enough space around the product for ventilation. Slots and openings in the storage cabinet should not be blocked.
5. It is highly recommended to connect the product to a surge protector to protect from damage caused by electrical surges. It is also recom-
mended to connect the product to an uninterrupted power supply (UPS), which has an internal battery that will keep the product running
in the event of a power outage.
1. Read and Follow Instructions: All the safety and operating instructions should be read before the product is operated. Follow all operating
instructions.
2. Retain Instructions: The safety and operating instructions should be retained for future reference.
3. Heed Warnings: Comply with all warnings on the product and in the operating instructions.
4. Polarization: Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
5. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure
of the type of power supplied to your location, consult your video dealer or local power company. For products intended to operate from
battery power, or other sources, refer to the operating instructions.
6. Overloading: Do not overload wall outlets or extension cords as this can result in the risk of fire or electric shock. Overloaded AC outlets,
extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock
or fire hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced by your
service technician.
7. Power-Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
8. Surge Protectors: It is highly recommended that the product be connected to a surge protector. Doing so will protect the product from
damage caused by power surges. Surge protectors should bear the UL listing mark or CSA certification mark.
9. Uninterrupted Power Supplies (UPS): Because this product is designed for continuous, 24/7 operation, it is recommended that you connect
the product to an uninterrupted power supply. An uninterrupted power supply has an internal battery that will keep the product running
in the event of a power outage. Uninterrupted power supplies should bear the UL listing mark or CSA certification mark.
10. Ventilation: Slots and openings in the case are provided for ventilation to ensure reliable operation of the product and to protect it from
overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surfaces. This product should never be placed near or over a radiator or heat register. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the product manufacturer’s instruc-
tions have been followed.
11. Attachments: Do not use attachments unless recommended by the product manufacturer as they may cause a hazard.
12. Water and Moisture: Do not use this product near water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, near a swimming pool, and the like.
13. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifi-
ers) that produce heat.
14. Accessories: Do not place this product on an unstable cart, stand, tripod, or table. The product may fall, causing serious damage to the
product. Use this product only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer.
15. Camera Extension Cables: Check the rating of your extension cable(s) to verify compliance with your local authority regulations before
installation.
16. Mounting: The cameras provided with this system should be mounted only as instructed in this guide or the instructions that came with
your cameras, using the provided mounting brackets.
17. Camera Installation: Cameras are not intended for submersion in water. Not all cameras can be installed outdoors. Check your camera
environmental rating to confirm if they can be installed outdoors. When installing cameras outdoors, installation in a sheltered area is
required.
Important Safeguards
General Cautions
Installation
WARNING
Risk of Electric Shock
Do Not Open