Full Product Manual

7
We strongly recommend that you install the cam-
eras after the initial testing and setup.
Please have the system and the cameras next to
each other for testing.
Please remember that most of the settings can be
changed later in the System Setup.
1. Please attach the antennas (two black anten-
nas) to the NVR.
2. Connect the power adapter(12V3A).
3. Connect the USB mouse.
4. Turn the power on the NVR.
1. Please attach the antenna (White antenna) to
the camera.
2. Connect the power adapter (12V1A).
3. Use the included power extension cable if
necessary.
For Non-Built-In Monitor Models
(e.g., CVT808N), please connect a Monitor or
TV with HDMI or VGA cable.
Please have the cameras close to the NVR and
make sure that all cameras are powered up.
I. Getting Ready
1. NVR (Network Video Recorder)
2. Camera
When you rst turn on the NVR, the Setup
Wizard will start.
Please follow the NEXT PAGE to set up the
system. It is the most efcient way to get your
system going.
Please note that all the settings can be
changed later.