Full Product Manual

8
The Setup Wizard will be launched on the rst
boot-up. If not, please launch the Setup Wizard
from the main menu.
II. Setup Wizard
1. Please select your Time Zone.
(E.g., Eastern Standard is “−05:00” UTC)
2. Select your Date and Time (Please use 24-hour
format for the time) then click Save changes.
3. Set the Date Format.
4. Click Next step.
1. Click Wireless Network Settings and you are
trying to connect from the table.
2. Conrm the WiFi Name and type in
the password.
3. Click Connect then Click Next step.
1. Make sure that your Hard Drive is listed in
the table.
2. Please check the box in the format column.
3. Click Format just below the table.
4. Click Next step.
1. WiFi Network Setup
2. General Setup
3. Storage Management
If you are connecting the NVR to your Home
WiFi router/network, please check Enable
and follow the steps below.
Our systems with Hard Drive will come for-
matted. However, it is recommended that you
format the Hard Drive again.
Connecting NVR to Home WIFI Router