Manualshelf

Full Product Manual

ManualsBrandsCrystal Vision ManualsElectrical8-Channel True HD 2TB HDD Wireless CCTV with 6-Autopair Waterproof IR Cameras Built-In Monitor and Router
41424344454647484950
43
5.3.5.8 IPC maintenance
Function: Allow user to upgrade camera firmware.
Operation Steps:
1. Right click to bring up the main menu, and go to: System setup > System admin > IPC
Maintenance.
2. Check the select boxes next to the camera you want to update from the list.
3. Select 'USB storage' from the Firmware from drop-down menu.
4. Click 'Start' to start; this will open a confirmation dialogue box. Click 'Yes' to Confirm
5. Wait till and confirm 'Upgrade Successful' on Status for all of your selected camera/s.
6. Click 'OK' to save the change and exit.
Tip:
Please use an USB flash drive to upgrade the firmware. USB hard drive may not be
recognized by the NVR system.
USB flash drive must be formatted to ‘Fat32’ format.
Make sure the upgrade firmware file (.rom) is located at the root directory of the USB flash
drive and not in the folder.
DO NOT unplug the system power during the upgrade, or the camera may get damage.
If you are getting message ‘Upgrade fail’ this could be an issue with weak signal, or the
cameras has higher version of firmware already installed.