Full Product Manual

5.6 Color Adjust

Function: Adjust the color and brightness of each camera.

Operation Steps:

1. Select the camera you will like to adjust the color by ‘Double click’ on the camera image.

2. Right click to bring up the main menu, and go to: ‘Color adjust’.

3. You can change ‘Hue’, ‘Brightness’, ‘Saturation’, and ‘Contrast’.

4. When you are done click ‘Ok’ to save & exit.

5.7 PTZ Control (Requires PTZ camera)

Function: Allow user to control PTZ camera.

Operation Steps:

1. Right click to bring up the main menu, and go to: ‘PTZ Control’.

2. Control PTZ camera using the on-board PTZ controller

Tip:

 This function only works with the PTZ camera connected.

 If you have multiple PTZ cameras connected, please select the camera before opening up

the PTZ control.