Operating Guide

2. Enable ‘Auto maintenance’ by selecting ‘Once’, ‘Everyday’, or ‘Every week’

3. Select the ‘date’, ‘time’, and ‘weekday’ to setup a schedule.

4. Click ‘Apply’ to save the setting

Config Export: Export current setting to USB flash drive.

Config Import: Import setting from the USB flash drive.

Note:

 With ‘Auto Maintenance’ enable the system will be automatically restart on the selected

date to fix any type of error or issue with the system. During the restart the system will not

be able to record any information.

 USB flash drive must be plugged in, and formatted to ‘Fat32’ format.

5.3.5.7 Factory setting

Function: Reset NVR system setting to factory default.

Operation Steps:

1. Right click to bring up the main menu, and go to: System setup > System admin >

Factory setting.

2. Check the functions you will like to reset and click ‘Apply’ > ‘Yes’ for confirmation message.

Note: To keep the camera connection please ‘UNCHECK’ the ‘Digital Channel’. Digital

channel is for the wireless camera connection setting, therefore, please uncheck this function

before resetting the system.