Instructions / Assembly

Battery Replacement

How to Lock

1. Unlock and Remove the U-bar.

2. Using included Hex Key(2mm) unscrew the hoding screw.

3. Pull out the main module from the lock body.

4. Open the Battery holder and replace the battery. The

batter holder door might be hard to open due to the

weather seal. Please use caution.

5. Make sure that the weather seal on the door is aligned

propery, and close the door.

Beep / Beep, Beep

3 4

How to Unlock

1. Insert the key and turn clockwise. Lock will be

unlocked and alarm will be deactivated if it was

activated.

2. Pull out the U-bar.

1. Insert the key and turn the key clockwise.

2. Push in the bar into the lock body.

3. Turn the key about a quater way anti-clockwise to

activate the alarm (alarm will Beep once), or repeat the

step to deactivate alarm (alarm will Beep twice).

4. Continue to turn the key to complete the lock and

activate the alarm.