User Manual

Specications  8
30 Series Operation Manual

PRESSURE RANGES, DISPLAY SCALES, & RESOLUTION
PSI bar kPa Overpressure PSI inch H
2
O inch Hg mmHg mmH
2
O cmH
2
O kg/cm
2
bar mbar kPa MPa
16 1 100 6.5 x 0.001 0.01 0.001 0.01 1 0.0001 0.0001 0.1 0.01
36 2 200 3.0 x 0.001 0.01 0.001 0.01 1 0.0001 0.0001 0.1 0.01
300 20 2000 2.0 x 0.01 0.1 0.01 0.1 1 0.001 0.001 0.1
1500 100 10 000 2.0 x 0.1 0.01 0.01 1 0.001
3000 200 20 000 1.5 x 0.1 0.01 0.01 1 0.001
5000 300 30 000 1.5 x 0.1 0.01 0.01 1 0.001
•
PSI versions with ranges of 36 PSI and lower include all possible scales except bar.
•
bar versions with ranges of 2 bar and lower include all possible scales except inch Hg, cmH2O, and MPa.
•
kPa versions are restricted to kPa, MPa, bar and/or millibar, depending on pressure range.

MODEL NUMBERING SYSTEM
Available Units
Intrinsic
Safety
Model Sensors
1st Pressure
Range Prex
2nd Pressure
Range Prex
Pressure
Unit
Manifold
-
IS 3
- / -
Standard ...........omit Single Sensor ...1 PSI ....PSI Standard ........omit
Metric units only
...SI Dual S
ensor
.....3 bar ...BAR S
tainless Steel
...SPSS
kPa
...KPA
SAMPLE PART NUMBERS
IS31-36PSI ...............Calibrator with one sensor (36 PSI)
IS33-36/3000PSI ..........Calibrator with two sensors (36 PSI and 3000 PSI)
IS33-16/1500PSI-SPSS ...Calibrator with two sensors (16 PSI and 1500 PSI) with two stainless steel manifolds

SERIAL NUMBERING SYSTEM
The serial number of your 30 Series is located on the rear of the product. Serial numbers consist of 10 numbers, with the left-most digit of the second
grouping representing the year of manufacturing. For example 043468 was manufactured in 2010.