User Manual

ManualsBrandsCrystal ManualsTools30 Series Digital Pressure Calibrator

Programming Instructions

For 30 Series Calibrators

30 Series

Summary of content (7 pages)

PAGE 1
30 Series Programming Instructions For 30 Series Calibrators
PAGE 2
Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Overview  1 —— Overview INTRODUCTION Thank you for choosing the 30 Series Calibrator from Crystal Engineering Corporation. When connected to a personal computer, using a standard micro USB cable, your 30 Series can be customized through the use of our free software, ConfigM30, available for download from crystalengineering.net. Also available for free download from our website are drivers for Labview®, a graphical programming language from National Instruments.
PAGE 4
Communication  2 —— Communication 30 SERIES COMMUNICATION FORMAT All Model 30 series products communicate and are calibrated through the micro USB interface. The port can be used to collect both displayed and internal data, and all front panel keys can be actuated with the exception of the (contrast) and (power) keys. The interface contains optical isolation, so that there is no direct electrical connection between the internal circuits and the external micro USB interface.
PAGE 5
Communication  3 Data String Format Table Prefix (3 bytes) , Data , Data , Data , P(S)(R) S = Sensor number R = Range number , 8 bytes of direct ADC output , 8 bytes of displayed data , 8 bytes of internal offset/tare value * mA(R) R = Range number , 8 bytes of direct ADC output , 8 bytes of displayed data n/a 18 bytes of ASCII spaces * P(S)T S = Sensor number , 8 bytes of direct ADC output of sensor temperature signal n/a 18 bytes of ASCII spaces * , 8 bytes of direct A
PAGE 6
—— Support  4 Support CONTACT US Phone �� (805) 595-5477 Toll-Free �� (800) 444‑1850 Fax �� (805) 595-5466 Email �� service@crystalengineering.net Web �� crystalengineering.