Software Manual

Data Entry Foot Switch Operation Manual

PAGE 1
Data Entry Foot Switch Operation Manual
PAGE 2
Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Overview  3 —— Overview Introduction The footswitch can significantly improve the speed at which data collection takes place by allowing the operator to focus on the task without needing to click a mouse button or press a key on the keyboard. The actual use of the footswitch is application dependent, and is documented in the manual that accompanied your Crystal Engineering software package.
PAGE 4
—— —— Instructions  4 Instructions Installation & Setup The foot switch comes in two pieces. The Control Module, which has an attached USB cable and two 1/8" sockets, and the Foot Switch, which has an attached cable ending in an 1/8" plug. Note: When connecting the Foot Switch to a computer for the first time, it is best to connect it after your computer has booted up and is logged in.
PAGE 5
—— —— Support  5 Support Contact Us Phone �� (805) 595-5477 Toll-Free �� (800) 444‑1850 Fax �� (805) 595-5466 Email �� service@crystalengineering.net Web �� crystalengineering.