Owner manual

GaugeCalHP Rebuild Kit Instructions

3
PN 5139
11 Using a 5/64" Allen key, loosen the
Set Screw and remove the Fine
Adjust Knob.
12 From the underside of the com-
parator, use a 9/16" Allen key to re-
move the four Socket Head Screws
securing the Fine Adjust Assembly
to the Manifold Base.
13 Remove the Fine Adjust Assembly
and replace the O-ring (
P N 5139).
 Rebuild the Fine Adjust Assembly
using the procedure on page 6.
When re-installing the Fine Adjust
Assembly, the Socket Head Screws
should be torqued to a value of
18–20 in-lbs.
14 Using a 5/64" Allen key, remove the
Travel Indicator.
—
Main Components and Assemblies