Instruction Manual

Specifications 15
XP2i Operation Manual
PRESSURE RANGES, DISPLAY SCALES, & RESOLUTION
PSI bar kPa Overpressure PSI
in
H
2
0 inHg mmHg mmH
2
0 kg/cm
2
bar mbar kPa MPa
15PSI 1BAR 100KPA 6.5 x 0.001 0.01 0.001 0.01 1 0.0001 0.0001 0.1 0.01
30PSI 2BAR 200KPA 3.0 x 0.001 0.01 0.001 0.1 1 0.0001 0.0001 0.1 0.01
100PSI 7BAR 700KPA 2.0 x 0.01 0.1 0.01 0.1 1 0.0001 0.0001 0.1 0.01
300PSI 20BAR 2KKPA 2.0 x 0.01 0.1 0.01 1 0.001 0.001 1 0.1
500PSI 30BAR 3KKPA 2.0 x 0.01 1 0.1 1 0.001 0.001 1 0.1
1KPSI 70BAR 7KKPA 2.0 x 0.1 0.1 0.001 0.001 0.1
2KPSI 140BAR 14KKPA 2.0 x 0.1 0.1 0.01 0.01 1 0.001
3KPSI 200BAR 20KKPA 1.5 x 0.1 0.1 0.01 0.01 1 0.001
5KPSI 300BAR 30KKPA 1.5 x 0.1 1 0.01 0.01 1 0.001
10KPSI 700BAR 70KKPA 1.5 x 1 0.01 0.01 1 0.001
Unneeded pressure units may be disabled via the RS-232 connector using ConfigXP software.
kPa models can display pressure in kPa and bar (or mbar) only. PSI and bar models can display all available units.
An XP2i will indicate pressure up to 10% above Range Pressure. Above 110%, the XP2i display will flash, indicating that the applied pressure exceeds the
calibrated pressure range. If the calibrated pressure range is exceeded, the pressure displayed may not be accurate.
MPa is available on -DD models only.
An Absolute pressure version is available only on XP2is and XP2i-DDs with ranges of 2000 PSI and higher.
MODEL NUMBERING SYSTEM
P/N Model
Adapter:
Type
Connection:
Location
Panel Mount? Data-logging?
XP2I
NPT: (omit) Bottom: (omit) No: (omit) No: (omit)
G 1/4 B:
-BSP Back: -RP Yes: -F4 Yes: -DL
"omit" for -F4
panel mount
Includes
-RP option
SAMPLE PART NUMBERS
300PSIXP2I ...............300 PSI standard gauge
500PSIXP2I-BSP .........500 PSI gauge, with a 1/4” BSP pressure tting
-RP option Rear Pressure Fitting -F4 option Panel Mount Flange