User guide

10
2 Familiarizing with Crystalio
2.2 – Crystalio Rear Panel (cont’d)
Video2/sync
Component/RGB2
Compo nent /RGB 1
Cr/R Y/G Cb/B
Video1/sync
LAN
USB
RS232
Cr/R Y/G Cb/B
HDTV Digital in HDTV Analog in
Hsync Vsync
SDI 1 SDI 2 SDI 3DVI Out
Exp ansion
S-Video1
230
S-Video2
VIDEO OUTPUT TERMINALS
Your display device(s) should be connected to these
terminals. Crystalio offers the following connection
configurations.
Digital
8 DVI
The DVI (Digital Video Interface) provides the best
quality video output from Crystalio. If you are
connecting to a display device that has a DVI terminal,
this is the recommended option to use. This allows
direct transmission of the video information from
Crystalio to the display without any conversion from
digital to analogue signals.
Analogue
9 5 x BNC Connectors
Can be used either as:
 RGBHV
 RGB(Cs)
 Component Video Y-Pb-Pr or Y-Cb-Cr
Computer / Network Connectivity
These are optional / advanced connections
10 USB (Universal Serial Bus)
Allows Crystalio to be upgraded using USB thumb
disk.
11 RJ45 Ethernet connection
Allows Crystalio to be connected to a computer
network for firmware upgrades.
RS232 DB9 Male Serial connection
Allows Crystalio to be integrated into and controlled
by home theatre control systems.
11 12
9
10
8