User guide

VPS-2300 User Guide
2 Familiarizing with Crystalio
2.2 – Crystalio Rear Panel
Video2/sync
Component/RGB2
Compo nent /RGB 1
Cr/R Y/G Cb/B
Video1/sync
LAN
USB
RS232
Cr/R Y/G Cb/B
HDTV Digital in HDTV Analog in
Hsync Vsync
SDI 1 SDI 2 SDI 3DVI Out
Exp ansion
S-Video1
230
S-Video2
POWER
1 Power Supply Cable Entry
Use the cable supplied with your Crystalio.
2 Power Supply Voltage Selector
This must be set to the same as your mains
voltage, either 110v or 220v AC. It should have
been set correctly by your supplying dealer.
!!Caution: Make sure this is correctly set BEFORE
connecting Crystalio to your power supply.
VIDEO INPUT TERMINALS
These allow you to connect your video sources to
Crystalio. Please refer to Section 3.3 for details.
Digital
3 HDTV Digital In
4 SDI 1, SDI 2, and SDI 3
Analogue
5 Component/RGB 1
Can be used either as:
 RGBs (RGB with composite sync) or RGsB (RGB
with Sync on Green)
 Component Video Y-Pb-Pr
 1 x Composite (CVBS) video and 1 x S-Video
6 Component/RGB 2
Can be used either as:
 RGBs (RGB with composite sync) or RGsB (RGB
with Sync on Green)
 Component Video Y-Pb-Pr
 1 x Composite (CVBS) Video and 1 x S-Video
7 HDTV analogue in
Can be used either as:
 High Definition Component Video Y-Pb-Pr
 RGBHV
 RGsB (RGB with Sync on Green)
1 2
3
4
5
6 7