Installation Sheet

5.5”
16”
MODEL#: 510-GA
ASSEMBLY AND DRESSING INSTRUCTIONS
WARNING: This product can
expose you to Lead, which is
known to the State of California to
cause cancer and/or birth defects
or reproductive harm. For more
information go to
www.P65Warnings.ca.gov
You will need 3 Candelabra
bulbs.40 Watts recommended
60 Watts max.Bulb not
included.
USE LED FOR EXTENDED USE
FIXTURE WIRE
SCREW
WIRE CONNECTOR
MOUNTING PLATE
GROUND WIRE
SCREW
CANOPY(W11.81”xH1”)
KEY HOLE
BALL NUT
GLASS DIFFUSER(W10.04”)
STUD
LEAVES FRAME
(The leaves can be
adjusted by bending
them slightly)
CLIPS
HEX NUTS
GROUND SCREW
KEY HOLE
2019/01
ASSEMBLY STEPS:
1. Attach the canopy onto the outlet box and secure it by ball nuts.
2. Install bulbs onto sockets.
3. Put the glass diffuser onto the bottom of leaves frame and secure it with clips.
4. Raise the leaves frame up to the ceiling and align the stud with the key hole onto the canopy and
twist lock it in clockwise direction(see illustration).
HOW TO REPLACE THE BULB:
Take the leaves frame off by twisting it in counter clockwise direction.