Installation Sheet

Table Of Contents

16"

22.5"

ASSEMBLY INSTRUCTION MODEL #516-GA

Canopy(W4.72",H0.79")

12.5"

99.5"

You will need 4-Candelabra Base Bulb

40 Watts Recommended 60 Watts Max.

USE LED BULBS FOR EXTENDED USE

This fixture is DAMP rated

Bead Sets

A.1 Set

(1)50mm

How to install

5.Attach the metal ball “A” on

the bottom of fixture.

Attach the center stem onto

the wiring house.

2.Attach the top of the center

stem onto the swivel.

3.Hook one end of decorative

chain onto the frame and the

other end onto the hook kit.

4.Place the candle sleeve onto

the socket and insert

recommended bulb (not

included).

PAGE 1
ASSEMBLY INSTRUCTION MODEL #516-GA Canopy(W4.72",H0.79") You will need 4-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is DAMP rated How to install 12.5" 22.5" A 16" 99.5" 1. Attach the center stem onto the wiring house. 2.Attach the top of the center stem onto the swivel. 3.Hook one end of decorative chain onto the frame and the other end onto the hook kit. 4.Place the candle sleeve onto the socket and insert recommended bulb (not included). 5.
PAGE 2
PART NUMBER MODEL #516-GA A B C D E F G H I J K L A. (1) - Mounting Hardware B. (1) - Canopy(W4.72",H0.79") #XRE514GACAN4.72IN C. (2) - Fixture Loop D. (2) - Ball Nut #XRE514GABANUT E. (2) - Quick Link F. (1) - Hanging Chain(72",4mm) #XRE514GACHA4MM G. (1) - Decorative Hook Kit H. (4) - Small Chain(each11.42",2mm) #XRE516GASMCHA2MM I. (1) - Center Stem(14.72",9.5mm) J. (1) - Metal Frame K. (4) - Candle Sleeve(W0.87",H3.94") #XRE516GACDL3.94IN L.