Installation Sheet

10mm metal ball+60mm metal ball
A:
MODEL#: 518-GA
ASSEMBLY AND DRESSING INSTRUCTIONS
You will need 6 Candelabra
bulbs.40 Watts recommended
60 Watts max.Bulb not
included.
6
10(5”)
WIRE CONNECTOR
GROUND SCREW
MOUNTING BAR
BULB(NOT INCLUDED)
5
A
3
/
4
"
24”
5”
31”
9
.25
”
11
16(18”)
13
15
17
4
19(W1”xH2”)
USE LED FOR EXTENDED USE
1
14
2
3
9
7
8
Assembly Instructions:
1)Pass wire through center rod
[1]and screw it into cluster
[2].Then through swivel[3],
2)Open the quick link , circled
[6] and screw collar[8]
together.
3)Screw the
top leaf assembly[4],fixture
loop[5] ,chain[6],last screw
[3 ]into[1].
[7]
threaded pipe[9]
from the canopy[10] inside
through the[10] and two
decorative metal leaves[11],
[12] into[8].Then pass wire
from [6] to [9].
4)Put over the metal band
ring[13] on the top of the
shade[14],open the clip in
the[15] to hold the bottom of
[14].
5)Take one of the decorative
chains[16],the top hanging
the hook[17],the bottom
hanging hook[18].The same
is true for the other two [16].
6)Put the candle sleeve[19] into
the socket, Insert
recommended bulb (not
applied).
7)Hang the metal ball”A” under
the [2].
12
18
WARNING: This product can
expose you to Lead, which is
known to the State of California to
cause cancer and/or birth defects
or reproductive harm. For more
information go to
www.P65Warnings.ca.gov
2018/11