Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
CRYST
WARNING:
Turn Power Off
Electrical Danger
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
RAMA
ASSEMBLY INSTRUCTION MODEL #5264-EB-CL-MWP
How to Install
FOR PENDANT
1). Screw the long nipple into coupling
on top of frame.
2). Place long tube and check ring over
nipple and secure with loop.
3). Install small loop to the canopy.
4). Connect fixture to the canopy with
chain and key link.
FOR SEMI FLUSH
1). Screw the short nipple into coupling
on top of frame.
2). Place short tube ,check ring and
canopy over nipple and secure them
with nut.
3. Attach mounting plate to the outlet
box using box screws.
4. Connect the fixture wires to the
supply wires.
5. Mount the fixture to the outlet box
with ball nuts.
6. Hook basket ring to the frame.
7. Hook crystal to the frame and body.
8. Install the bulb (Not included) in
accordance with the fixture’s
specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!)
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
CSA528807LAMR1
23 1/4"
20"
Crystal Sets
A. 235 Pcs. 14mm+60mm
A
You will need 1 - Medium Bulb and
6 - Candelabra Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
20 1/4"
20"
6 1/4"
1"
Semi-Flush
Pendant
A(16pcs)
A(32pcs)
A(48pcs)
A(64pcs)
A(78pcs)