Installation Sheet

Table Of Contents

ASSEMBLY INSTRUCTION MODEL #595-EB-GA

18"

28.5"

1.Attach the center stem onto

the wiring house.

2.Attach the top of the center

stem onto the swivel.

3.Place the candle sleeve onto

the socket and insert

recommended bulb (not

included).

4.Adjust the fixtures individual

metal frames, by gently

turning them to the preferred

angle.

Canopy(W5.12",H0.79")

105.5"

You will need 6-Candelabra Base Bulb

40 Watts Recommended 60 Watts Max.

USE LED BULBS FOR EXTENDED USE

This fixture is DAMP rated

PAGE 1
ASSEMBLY INSTRUCTION MODEL #595-EB-GA Canopy(W5.12",H0.79") You will need 6-Candelabra Base Bulb 105.5" 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is DAMP rated 28.5" 18" 1.Attach the center stem onto the wiring house. 2.Attach the top of the center stem onto the swivel. 3.Place the candle sleeve onto the socket and insert recommended bulb (not included). 4.Adjust the fixtures individual metal frames, by gently turning them to the preferred angle.
PAGE 2
PART NUMBER MODEL #595-EB-GA A B C D E F G H I J A. (1) - Mounting Hardware B. (1) - Canopy(W5.12",H0.79") #XRE593EBCAN5.12IN C. (1) - Collar Ring D. (1) - Collar Loop E. (2) - Quick Link F. (1) - Hanging Chain(72",4mm) #XRE593EBCHA4MM G. (1) - Fixture Loop H. (1) - Swivel I. (1) - Center Stem(17.09",9.53mm) J. (6) - Candle Sleeve(W0.87",H3.54") #XRE595GACDL3.