Installation Sheet

Table Of Contents

7.5"

18.5"

ASSEMBLY INSTRUCTION MODEL #605-GA

You will need 4 -Candelabra Base Bulb

40 Watts Recommended 60 Watts Max.

USE LED BULBS FOR EXTENDED USE

A. 50 Sets.

(3)20mm + (3)16mm + (4)12mm

+ (3)(30-12)mm + (4)8mm

Light Cluster

Bottom Stem

1.Do a complete inventory of all parts

and components before you start

installation.

2.Attach the Bottom Stem onto the

Light Cluster.

3.Raise the Light Cluster onto the

Mounting Plate, and secure it with

the Ball Nuts.

4.Dress the fixture with beads “A” as

illustrated.

PAGE 1
ASSEMBLY INSTRUCTION MODEL #605-GA Light Cluster 7.5" Bottom Stem A You will need 4 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. 18.5" A= USE LED BULBS FOR EXTENDED USE 1.Do a complete inventory of all parts and components before you start installation. 2.Attach the Bottom Stem onto the Light Cluster. 3.Raise the Light Cluster onto the Mounting Plate, and secure it with the Ball Nuts. 4.Dress the fixture with beads “A” as illustrated. A. 50 Sets.
PAGE 2
PART NUMBER MODEL #605-GA Outlet box A B C E D F G G H I J K M L N O P Q R S T A. (2) - Wire Connector B. (2) - Screw C. (1) - Mounting Plate D. (2) - Hex Nut1 E. (1) - Cord Grip F. (1) - Ground Screw G. (2) - Outlet Box Screws H. (1) - Hex Nut2 I. (1) - Spring Washer J. (1) - Lock Washer K. (1) - Ground Wire L. (1) - Threaded Pipe M. (1) - Canopy(18"x1") N. (1) - Insulation Pad O. (2) - Ball Nut #XRE600GABALLNUT P. (1) - Top Stem Q. (4) - Socket Sleeve R. (4) - Arms S.