Installation Sheet

ManualsBrandsCrystorama Lighting Group ManualsChandeliersHollis 6 Light 49" Wide Crystal Linear Chandelier with Hand Cut Crystal Accents

Table Of Contents

ASSEMBLY INSTRUCTION MODEL #8407-FB

20.5"

49”

8”

12"

A,B,C,

D,E,F,G

Cap Nut

DETAILED ILLUSTRATION

How to install the mounting

plate

1.Put the mounting plate over the

outlet box and mark two points on

the wall at the center of key holes.

2.Drill the holes at the marked points

and insert the wall anchor inside the

hole drilled.

3.Place the mounting plate over the

outlet box and insert the wall anchor

screws inside the wall anchors in the

wall and tighten it.

How to install

1.There are two hanging rods.

Connect one to the left side cluster

and the second to the right side

cluster.

2.Insert recommended bulbs (not

included).

3.Dress the crystal drops as

illustrated.

Crystal Sets

A.8 Pieces

219mm

B.10 Pieces

227mm

C.8 Pieces

231mm

D.8 Pieces

239mm

You will need 6-Candelabra Base Bulb

40 Watts Recommended 60 Watts Max.

USE LED BULBS FOR EXTENDED USE

E.8 Pieces

245mm

F.6 Pieces

252mm

G.8 Pieces

255mm

Summary of content (2 pages)

PAGE 1
ASSEMBLY INSTRUCTION MODEL #8407-FB 8” 49” You will need 6-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. 20.5" USE LED BULBS FOR EXTENDED USE 12" How to install the mounting plate 1.Put the mounting plate over the outlet box and mark two points on the wall at the center of key holes. 2.Drill the holes at the marked points and insert the wall anchor inside the hole drilled. 3.
PAGE 2
PART NUMBER MODEL #8407-FB Outlet box A B C D E F G A. (1) - Mounting Hardware Includes: (1) - Mounting Plate (4) - Wall Anchors (4) - Anchor Screws (3) - Wire Nuts B. (1) - Canopy(L27.95",W4.33",H0.98") #XRE8407FBCAN27.95IN C. (4) - Fixture Loop D. (4) - Quick Link E. (2) - Hanging Chain(each72",5mm) #XRE8407FBCHA5MM F. (2) - Hanging Rod(5.91",12.7mm) #XRE8407FBROD5.91IN G.