Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #8829
R
C
U
L
WARNING:
Electrical Danger Turn Power Off
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
You will need 12-Candelabra Base Bulb
40Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
How to Install
1.Do a complete inventory of all parts and
components before you start installing
2.Place the crystal bobeche and metal washer over
the cap on the top of fixture and secure them
with fixture loop．
3.After safely attaching fixture into outlet box,
install bulb and proceed to
connecting the power.
4.When you begin to dress the fixture, start with
packet labeled (A)
5.IMPORTANT: Apply crystal sets in alphabetical
order
A. (14mm+50mm)x96sets
Crystal Sets
B. (10mm Ball x38 )x1set
C. 50mm Ballx1set
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproducve harm. For more
informaon go to www.P65Warnings.ca.gov
A B C