Installation Sheet

PART NUMBER
Part Number
Part Numbers
MODEL #BEL-A8061-GE
B.(1)Backplate;5″x6.6″x0.8″h;
XMO8061GEBKP6.6IN
C.(3)Cap nut
D.(1)Socket
E.(1)Glass frame;XMO8061GEGLAFRAME
B
C
D
E
F-Size
4″
6″
4
1
2″
1
8″
F
F.(4)Glass;XMO8061GLA6.1IN
A.Mounting Hardware
(3)Wire Nut
(1)Mounting Plate
(4)Anchor Screw
(2)Mounting Screw
(1)Green GroundScrew
(4)Outlet box screw
A
Green Ground
Screw
Anchor Screw
Mounting
Screw
Outlet box
screw
Wire Nut
x4 x2 x3
Anchor Screw
Mounting Screw Wire Nut
1.Put the mounting plate over the outlet box and mark the 4 points on the
wall surface at the center of 4 holes on the mounting plate.
2.Drill 4 holes at the marked points and insert the wall anchors.
3.Place the mounting plate over the outlet box and secure it with outlet
screws.Insert the wall anchor screws inside the wall anchors and tighten it.
For installation of mounting plate: