Installation Sheet

How to Install
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
ASSEMBLY INSTRUCTION
You will need 4-Cand.BULB
60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE
®
MODEL #CLO-8894-AG
1.Connect the fixture onto the outlet box in the ceiling
18.3″
12″
CRYSTAL SETS:
E:Ø30mmx40,Crystal ball with long thread
Ø30mmx40,Crystal ball
G:Ø6mmx10,Ø8mmx10,Ø40mmx1
2.Install the recommended bulbs (not included)
into each socket,install crystal on canopy
and bottom ring
E:
3.Insert each long threaded crystal ball through the
bottom of the ring, then secure it from the top with
the crystal ball (without nipple).
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
G:
8.2″