Installation Sheet

ASSEMBLY INSTRUCTION
MODEL #CLO-8897-AG
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
®
22″
How to Install
1. Attach the Rods onto the nipple on top of fixture.
Determine the preferred height and adjust to the
required rods.
2. Hook the chain onto the Rods by quick link. Determine
the preferred height and adjust to the required chain.
3.Install the recommended bulb into each socket and
install the crystal ball on the bottom ring.
4.Insert each long threaded crystal ball through
the bottom of the ring, then secure it from the top
with the crystal ball (without nipple).
CRYSTAL SETS:
M:∅30mmx60,Crystal ball with long thread
∅30mmx60,Crystal ball
83.5″
12″
45″
M:
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov