Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #FIO-A9104-GA-CL
All electrical components must be installed by a
licensed electrician in accordance with the National
Electric Code and the appropriate
local electrical codes.
You will need 4–Candelabra
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
How to Install:
1. Have the fixture wire pass through the Center Rod (4), and
then attach the Center Rod to the Bottom Frame (5).
2.
Feed the fixture wire through the Top Cover (3), Top
Ring (2), and Loop (1). Then hang Crystal Strand (A) to
the Top Cover (3) as per illustration.
3. Place the Top Ring (2) over the Top Cover (3), then secure
it by turning the Loop (1) until tight.
4. The canopy of the fixture can now be mounted to the ceiling
by following instruction Drawing 2.
5. Install the Bulb (8) to the Socket (7).
6. Hook the Bottom of Crystal Strand (A) to the Bottom Frame
(5).
Clear Bead Sets
:
A. 16 Sets.
(8)10mm + (9)12mm + (9)14mm + (7)18mm
Bulb replacement:
1. Install the Bulb (8) into the Socket (7).
lntertek
CM
US
C
27"
33.25"
Drawing (1)
Crystal
Strand (A)
Bulb (Not
included) (8)
CEILING JUNCTION BOX
SUPPLY WIRES
SUPPLY GROUND WIRE
FIXTURE WIRES
FIXTURE GROUND WIRE
MOUNTING BAR
GROUND SCREW
MACHINE SCREW
THREADED PIPE
HEX NUTS
CANOPY
SCREW COLLAR
COLLAR RING
CHAIN
ADJUSTABLE
CHAIN LINK
Drawing (2)
KNOT
26"
A =