Installation Sheet

#HUD-A2214-CH
You will need 4 Candelabra Base Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
How to install the crossbar
1. Do a complete inventory of all parts and components
before you start installing.
2. Fasten mounting hardware to junction box with machine
screws.After wires are connected,place fixture against
mounting surface allowing the machine screws to pass
through the canopy,secure with cap nuts.
3. After safely attaching fixture into junction box ,install
bulbs and proceed to connecting the power.
4. Apply glass strands by starting with strand G, then install
strands E, F, C, D, A and B.
1. Place the crossbar over the outlet box and mark the 4
points on ceiling at the center of keyholes.
2. Drill the holes on the marked points and insert the wall
anchor.
3. Place the crossbar over the outlet box and secure it by
anchor screws.
How to install
A
B
C
D
E
F
G
E
E
F
F
C
C
C
C
C
C
D
D
D
D
D
D
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
[ 䌙 16"]
[
17"
]
[2
1
2
"]
Reference for how to dress
Note: Hang glass strand "A"and
"B"alternating,"C"and "D"
alternating,"E"and "F" alternating
Glass Strands
A.
11sets L3 1/8”
B.
11sets L6 1/8”
C.
7 sets L6 1/8”
D.
7 sets L9 1/4”
E.
3 sets L9 1/4”
F.
3 sets L12 3/8”
G.
1 set L1
3
5/8”