Installation Sheet

ASSEMBLYINSTRUCTIONMODEL#KIR-B8100-BF
CRYST
RAMA
C
U
WARNING:
ElectricalDanger
TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Youwillneed2-MediumBaseBulb
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
1 . Threadthemountingscrewsintothematching
holesinthemountingstrap.Securethemounting
straptooutletboxwiththeoutletboxscrews.
4 . Installthebulb(notincluded)intosocket.
Howtoinstall
2 . Connectfixturewirestosupplywiresinoutletbox.
3 . Raiseceilingpanupallowingforthemounting
screwstoprotrudethroughkeyslotsontheceiling
pan.Rotateceilingpanclockwiseuntilmounting
screwsareinnarrowpartofkeyslots,tightenwith
screwdriver.
5 . Threadthenippleontothecouplingandadjust
thelengthofnippletofitwiththeglass.Tighten
itwithhexnut.
OUTLETBOXSCREW
MOUNTINGSCREW
6 . Slidetheglass,theplasticwasherandthe
metalwasheroverthenipple,thensecurewith
thehexnut.
MOUNTINGPLATE
HEXNUT
NIPPLE
PLASTICWASHER
METALWASHER
HEXNUT
CAP
FINIAL
7 . Placethecapoverthenippleandsecurewith
thefinial.
COUPLING
SOCKET
GLASS
KEYSLOT
GLASS
CEILINGPAN
13-3/8’’
12-3/4’’
5-1/4’’
6-7/8’’
ThisfixtureisDamprated