Installation Sheet

15"
A
10"
ASSEMBLY INSTRUCTION MODEL #MER-4865-GA
You will need 5 -Candelabra Base Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
1.Do a complete inventory of all
parts and components before you
start installation.
2.Determine the preferred hanging
height and adjust to the required
stems.
3.Feed the wires through the
selected stems, prior to
assembling them together.
4.Connect the stem assembly to the
fixture frame.
5.After screwing the swivel into the
canopy, take the top of the stem
assembly and attach it to the
swivel.
6.Place the candle sleeve onto the
socket, and insert recommended
bulb (not included).
A.54 Pieces. (+1 SPARE)
120x30mm
A=
53.5"
Please note:
Before the swivel is
screwed onto the stem,
please loosen the set
screw on the side of swivel.