Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
CRYST
WARNING:
Turn Power Off
Electrical Danger
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
RAMA
ASSEMBLY INSTRUCTION MODEL #QUI-7623-DT
How to Install
1. Attach mounting plate to the junction
box using box screws.
2. Connect the fixture wires to the
supply wires.
3. Connect the fixture to the mounting
plate with screws.
4. Attach crystal to the frame with
washer and ball nut.
5. Place candle sleeves onto the socket.
6. Install the bulb (Not included) in
accordance with the fixture’s
specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!)
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
CSA516803VAMR1
You will need 3 - Candelabra Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
25"
7"
5"