Installation Sheet

ASSEMBLYINSTRUCTIONMODEL#RAM-A3404-PN
CRYST
RAMA
C
U
WARNING:
ElectricalDanger
TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Youwillneed4-MediumBaseBulb
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
7 . Installthebulb(notincluded)intosocket.
Howtoinstall
4 . Installbackplateontothemountingplate,and
securewiththescrews.
6 . Placetheglassshadeoverthesocket,and
securewiththesocketring.
1 . Placethemountingplateovertheoutletbox.
Marktwopointsonthewallatthecenterof
keyholeonthemountingplate.
5 . Threadthenippleintothebottomofsocket.Slide
thecrystaloverthenipple,thensecureitwiththe
finial.
3/4’’
4-1/2’’
7-1/2’’
7’’
3-1/2’’
6’’
3-5/8’’
5-3/4’’
FRONTVIEW
SIDEVIEW
32’’
29-1/8’’
2 . Drilltwoholesatthemarkedpointsandinsert
thewallanchors.
3 Placethemountingplateovertheoutletbox
andsecureitwithoutletboxscrews.Insert
theanchorscrewsinsidethewallanchorinside
thewalland tightenit.
.