Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS

ASSEMBLY INSTRUCTION MODEL #ROX-A9000-GA

All electrical components must be installed by a

licensed electrician in accordance with the

National Electric Code and the appropriate

local electrical codes.

You will need 3–Candelabra

40 Watts Recommended 60 Watts Max

USE LED BULBS FOR EXTENDED USE

How to Install:

1. Install the Bulb (5) to the Socket (6).

2. The canopy of the fixture can now be mounted to

the ceiling by following instruction Drawing 2.

3. Raise the Frame (4) to the ceiling and hook the

Safety Cable (2) onto the Mounting Plate (1). Now

the Lighting Fixture is supported by the Safety

Cable (2).

4. Attach the Frame (4) onto the ceiling and secure

with the Metal Nuts (3) until tight.

5. Hook the Crystal Ball (7) to the bottom of the Ball

Finial (8).

Bulb replacement:

1. Install the Bulb (5) into the Socket (6).

lntertek

PAGE 1
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #ROX-A9000-GA All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. CM C US lntertek You will need 3–Candelabra 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE How to Install: 1. Install the Bulb (5) to the Socket (6). 2. The canopy of the fixture can now be mounted to the ceiling by following instruction Drawing 2. 3.
PAGE 2
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #ROX-A9000-GA Part Number A. (1) Mounting Hardware B. (1) Safety Cable C. (2) Metal Nut (XFW9000GANUT) D. (1) Frame E. (1) Ball Finial (XFW9000GAFIN) F. (3) Socket (H2 ") G. (1) Crystal Ball; w1.5"x h2.64" ( XFW9000GACRY1.