Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS

ASSEMBLY INSTRUCTION MODEL #ROX-A9006-GA

All electrical components must be installed by a

licensed electrician in accordance with the National

Electric Code and the appropriate

local electrical codes.

You will need 6–Candelabra

40 Watts Recommended 60 Watts Max

USE LED BULBS FOR EXTENDED USE

How to Install:

1. Screw the loop (1) onto the Frame (2).

2. Install the Bulb (3) into the Socket (4).

3. The canopy of the fixture can now be mounted to the ceiling

by following instruction Drawing 2.

4. Hook the Crystal Ball (5) to the bottom of the

Ball Finial (6).

Bulb replacement:

1. Install the Bulb (3) into the Socket (4).

lntertek

PAGE 1
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #ROX-A9006-GA All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. CM C US lntertek You will need 6–Candelabra 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE How to Install: 1. Screw the loop (1) onto the Frame (2). 2. Install the Bulb (3) into the Socket (4). 3.
PAGE 2
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #ROX-A9006-GA Part Number A. (1) Mounting Hardware B. (1) Canopy; w5"x h0.75" (XFW9003GACAN5IN) C. (1) Collar Ring D. (1) Collar Loop E. (2) Link F. (1) Chain ; w4.2mm (XFW9003GACHA4.2MM) G. (1) Loop H. (1) Frame I. (1) Ball Finial (XFW9000GAFIN) J. (6) Socket (H2”) K. (1) Crystal Ball; w2"x h3.