Installation Sheet

ASSEMBLY INSTRUCTION MODEL#
C
U
Electrical Danger
Turn Power off
WARNING:
This product can expose you to Lead
which is known to the state of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
LIGHTING THE WAY FOR SIXTY YEARS
installed by a licensed electrician
in accordance with the National
All electrical components must be
Electric Code and the appropriate
local electrical codes.
You will need 5- Medium Base Bulb
60 Watts Recommended 100 Watts Max.
USE LED BULBS FOR EXTENDED USE
SIDE VIEW
THE FIXTURE IS DAMP RATED
12"rod
6"rod
1" Nipple(3)
12"rod
12"rod
How to install
Install the bulb(not included) into the socket.
Install canopy onto the mounting plate, and
secure with the screws.
Install the mounting plate to the outlet box using
two outlet box screws.
Determine the desired hanging height and choose
the correct length of rods.
Feed fixture wires through the rod and canopy.
Connect the rods together and then screw the canopy
onto the uppermost rod.
Screw the threaded nipple(F)onto the coupler on the
ceiling pan and secure with hexnut.
Place the metal washer, plastic washer and glass diffuser,
plastic washer,metal washer, in that order, over the
threaded Nipple and secure with hex nut.
Place the bottom cap over the threaded nipple and secure
with the finial.
Screw the light cluster onto the frame.