Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS

ASSEMBLY INSTRUCTION MODEL# STM-B5106-BZ-GA

All electrical components must be installed by a

licensed electrician in accordance with the National

Electric Code and the appropriate

local electrical codes.

You will need 6–Candelabra

40 Watts Recommended 60 Watts Max

USE LED BULBS FOR EXTENDED USE

This fixture is DRY rated

How to Install:

1. The canopy of the fixture can now be mounted to the

ceiling by following instruction Drawing 2.

2. Install the Bulb (3) into the Socket (2).

Bulb replacement:

Install the Bulb (3) into the Socket (2).

lntertek

PAGE 1
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL# STM-B5106-BZ-GA All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. CM C US lntertek You will need 6–Candelabra 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE This fixture is DRY rated How to Install: 1. The canopy of the fixture can now be mounted to the ceiling by following instruction Drawing 2. 2.
PAGE 2
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL# STM-B5106-BZ-GA Part Number Part Numbers A. (1) Mounting Hardware B. (1) Canopy; w5"x h0.75"(XFW5106GACAN5IN) C. (1) Collar Ring D. (1) Collar Loop E. (2) Link F. (1) Chain ; w4.2mm x L72" (XFW5106GACHA4.2MM) G. (1) Loop H. (6) Socket (H2 ") I.