Installation Sheet

ASSEMBLYINSTRUCTIONMODEL#VER-241-AG
CRYST
RAMA
C
U
WARNING:
ElectricalDanger
TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Youwillneed1-CandelabraBaseBulb
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
1 . First,removescrewfromsideofbackplate
andremovemountingplate.
2 . Installthemountingplatetotheoutletbox
usingtwoscrews.
6 . Installthebulbintosocket.
Howtoinstall
3 . Connectfixturewirestooutletbox.
4 . Mountthebackplateoverthemountingplate
andthensecureitwithmountingscrews
4-3/4’’
FRONTVIEW
SIDEVIEW
6’’
5’’
8-1/4’’
3/4’’
7-5/8’’
5-3/4’’
10-3/4’’
5 . Installthefabricshadeontothecandlesleeve.