Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL# WES-9901-BK-GA
All electrical components must be installed by a
licensed electrician in accordance with the
National Electric Code and the appropriate
local electrical codes.
You will need 1–Candelabra
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
How to Install:
1. Attach the Mounting Plate (1) onto Junction box.
2. Attach the Back plate (2) over the Mounting Plate (1), aligning
the 4 holes on the Back plate (2) with the 4 threaded holes on
the Mounting Plate (1). Insert the Screws (3) and tighten to
secure the Back plate (2).
3. Place the Shade (5) onto the Candle Sleeve of the Socket (6).
4. Install the Bulb (4) into the Socket (6).
5. Screw the Rod onto the Lamp Body (7).
Note: There are two sizes of Rod. Select the desired length of Rod
you like.
Bulb replacement:
1. Install the Bulb (4) into the Socket (6).
lntertek
CM
US
C