Instruction manual

www.cs-instruments.com
37
Consumption
Option: Integrated data logger
 Automatic recording of the
compressed air consumption
 Quantifying of leakages,
compressed air consumption in
production-free times, e. g. weekends
 Memory for 1 million measured values
Option: 2 additional sensor inputs
 For connection of pressure sensors,
temperature sensors, clamp-on
ammeters
Sensors please see page 41
Technical data VA 400
Parameters: m
3
/h Standard,
acc. to DIN 1945, ISO 1217
20°C, 1000 mbar
Adjustable via m
3
/h, m
3
/min, l/min, l/s,
DS 300: ft/min, cfm, m/s,
kg/h, kg/min
Meas. principle: calorimetric measurement
Sensor: 2 x silicium chip
Meas. medium: air, gas
Gas types select. air, nitrogen, argon,
via software: helium, CO2, oxygen
Meas. range: see table page 34
Accuracy: ± 4 % m.v.
± 3 % m.v. via 5 point
ISO precision calibration
Operating temp.: -30...+110°C probe tube
-30...+80°C housing
Operating press.: up to 50 bar
Analogue output: 4...20 mA
Burden: < 500 Ohm
Pulse output: 1 pulse per m
3
Probe tube: stainless steel 1.4301
Mounting thread: G 1/2”
Housing diameter: 65 mm
Technical data DS 300
Dimensions: 118 x 115 x 93 mm, IP 65
(wall housing)
92 x 92 x 70 mm, IP 65
(panel mounting)
Inputs: 2 digital inputs for
VA 400 resp. FA 410
Interface: USB
Keypad: 4 keys
Power supply: 100-240 VAC, 50-60 Hz
Accuracy: see VA 400
Alarm outputs: 2 relays, 230 VAC, 3 A
Operating temp.: 0...50 °C
Transport -20...70 °C
temperature:
OPTIONS
Data logger: 1 million meas. values
start/stop time, meas.
rate freely adjustable
RS 485 interface: up to 32 x DS 300
connectable
evaluation at the PC with
CS Soft Network
2 additional for connection of pressure
sensor inputs: sensors, temperature
sensors, clamp-on amme-
ters, third-party sensors
with 4...20 mA, 0 bis 10 V,
Pt100
Description Order no.
Flow station DS 300 for installation into existing pipelines
(diamater freely adjustable at DS 300):
Flow station DS 300 consisting of: 0600 4005
Multifunction measuring instrument DS 300 and consumption probe
VA 400 in basic version: Standard (92.7 m/s), probe length: 220 mm
Flow station DS 300 including measuring section (stainless steel)
Flow station DS 300 consisting of:
Multifunction measuring instrument DS 300 and consumption probe VA 400
in basic version: Standard (92.7 m/s), probe length: 220 mm incl. measuring
section with ball valve made from stainless steel 1,4301; up to DN 65 (2 1/2”)
with external thread, from DN 80 (3”) with flange according to DIN 2633
External thread Pipe (outerø x wall thinkness) Total length Order no.
G 1/2” 21.3 x 2.6 mm 500 mm 0601 0261
G 3/4” 26.9 x 2.6 mm 600 mm 0601 0262
G 1” 33.7 x 3.2 mm 750 mm 0601 0263
G 1 1/4” 42.4 x 3.2 mm 900 mm 0601 0264
G 1 1/2” 48.3 x 3.2 mm 1000 mm 0601 0265
G 2” 60.3 x 3.6 mm 1250 mm 0601 0266
G 2 1/2” 76.1 x 3.6 mm 1500 mm 0601 0267
From DN 80 with flange DIN 2633
DN 80/88.9 88.9 x 2.0 mm 1850 mm 0601 0268
DN 100/114.3 114.3 x 2.0 mm 2104 mm 0601 0269
DN 125/139.7 139.7 x 3.0 mm 2860 mm 0601 0270
DN 150/168.3 168.3 x 3.0 mm 3110 mm 0601 0271
Options for multifunction measuring instrument DS 300
Integrated data logger for 1 million measured values Z500 3001
RS 485 interface for connection of up to 32 instruments DS 300 Z500 3002
2 additional sensor inputs for connection of pressure sensors, temperature Z500 3003
sensors, clamp-on ammeters, third-party sensors with 4...20 mA, 0...10 V, Pt 100
Ethernet interface Z500 3005
Options for consumption probe VA 400
Max. version (185 m/s) Z695 4003
High Speed version (224 m/s) Z695 4002
Probe length 120 mm ZSL 0120
Probe length 160 mm ZSL 0160
Probe length 300 mm ZSL 0300
Probe length 400 mm ZSL 0400
Accessory
CSM-S for data evaluation in graphic and in table form including 0554 7011
USB interface