Instruction manual

www.cs-instruments.com
45
• Spot drilling collar
Description Order no.
Thickness meter CS 0495 including case and calibration block 0560 0495
Useful accessories:
Spot drilling collars
Technical data CS 0495
Meas. range: 1.5…200 mm, 0.06…8 Inch
Meas. prinicple: ultrasonic
Measured steel, cast iron,
materials: aluminium, copper,
brass, zinc,
quartz glass, polyethylene,
PVC, grey iron,
nodular cast iron
Calibration block: included in shipment
Resolution: 0.1 mm
Accuracy: ± (0.5 % n+0.1)
Power supply: 4 x 1.5 V AA
(UM-3) batteries
Dimensions: 160 x 68 x 32 mm
Weight: 208 g
If there is no measuring site with 1/2" ball
valve present it can be set up by means of
spot drilling collars.
The spot drilling collar is imposed onto the
pipe and tightened via thread rods. The
enveloping rubber gasket is pressure-tight
up to 10 bar. By means of the drilling jig
(page 44) it is possible to drill through the
1/2" ball valve into the existing pipe.
Important: Please indicate the exact outer
diameter of the existing pipe when placing
the order resp. please select the suitable
spot drilling collar from the adjoining list.
Thickness meter
CS 0495
The entry of the correct inner diameter is
essential for an accurate consumption
measurement.
The thickness meter CS 0495 enables
a quick, easy and accurate measurement
of the wall thickness of pipes. So the
determination of the inner diameter
becomes very easy.
Consumption
Description DN Order no.
Spot drilling collar for pipe
Ø 026 - 030 mm, Length: 100 mm,* 0500 0447
Spot drilling collar for pipe
Ø 032 - 036 mm, Length: 100 mm,* 0500 0446
Spot drilling collar for pipe
Ø 036 - 040 mm, Length: 100 mm,* 0500 0448
Spot drilling collar for pipe
Ø 040 - 044 mm, Length: 150 mm,* 0500 0449
Spot drilling collar for pipe
Ø 044 - 051 mm, Length: 200 mm,* 0500 0610
Spot drilling collar for pipe
Ø 048 - 055 mm, Length: 200 mm,* 40 0500 0611
Spot drilling collar for pipe
Ø 052 - 059 mm, Length: 200 mm,* 0500 0612
Spot drilling collar for pipe
Ø 057 - 064 mm, Length: 200 mm,* 50 0500 0613
Spot drilling collar for pipe
Ø 063 - 070 mm, Length: 200 mm,* 0500 0614
Spot drilling collar for pipe
Ø 070 - 077 mm, Length: 200 mm,* 65 0500 0615
Spot drilling collar for pipe
Ø 075 - 083 mm, Length: 200 mm,* 0500 0616
Spot drilling collar for pipe
Ø 082 - 090 mm, Length: 200 mm,* 0500 0617
Spot drilling collar for pipe
Ø 087 - 097 mm, Length: 200 mm,* 80 0500 0618
Spot drilling collar for pipe
Ø 095 - 104 mm, Length: 200 mm,* 0500 0619
Spot drilling collar for pipe
Ø 102 - 112 mm, Length: 200 mm,* 0500 0620
Spot drilling collar for pipe
Ø 108 - 118 mm, Length: 200 mm,* 100 0500 0621
Spot drilling collar for pipe
Ø 118 - 128 mm, Length: 200 mm,* 0500 0622
Spot drilling collar for pipe
Ø 125 - 135 mm, Length: 200 mm,* 0500 0623
Spot drilling collar for pipe
Ø 133 - 144 mm, Length: 200 mm,* 125 0500 0624
Spot drilling collar for pipe
Ø 145 - 155 mm, Length: 250 mm,* 0500 0625
Spot drilling collar for pipe
Ø 151 - 161 mm, Length: 250 mm,* 150 0500 0626
Spot drilling collar for pipe
Ø 159 - 170 mm, Length: 250 mm,* 0500 0627
Spot drilling collar for pipe
Ø 168 - 180 mm, Length: 250 mm,* 0500 0628
Spot drilling collar for pipe
Ø 180 - 191 mm, Length: 250 mm,* 175 0500 0629
Spot drilling collar for pipe
Ø 193 - 203 mm, Length: 300 mm,* 0500 0630
Spot drilling collar for pipe
Ø 200 - 210 mm, Length: 300 mm,* 0500 0631
Spot drilling collar for pipe
Ø 209 - 220 mm, Length: 300 mm,* 200 0500 0632
*
incl. 1/2” ball valve