Instruction manual

www.cs-instruments.com
9
If no Ethernet-/Bus connection is existing
or if the installation would be too costly the
recorded data can be stored onto a USB
stick and transferred to the PC. DS 500
will automatically identify the USB stick.
The user will be guided through the menu
"Read-out data".The data stored in the USB
stick can be comfortably evaluated at the
PC by means of the CS Soft Basic.
versatile CS Soft Basic, which leaves
nothing to be desired. Threshold exceedings
can be sent via SMS and e-mail.
The current measured data and the stored
measured data can be transferred via
Ethernet or RS 485 (Modbus).
Data transfer, remote maintenance and consumption analysis via webserver
and integrated Ethernet interface, Modbus, RS 485…
Data transfer via USB stick
or USB cable
2.
1.
CS Soft Basic
Flexible data transfer for each application
The integrated webserver enables the user
to read out the measured data via internet.
For the evaluation of the data at the PC the
user can dispose of the comfortable and
DS 500 can be connected via Ethernet/
RS 485 to customers' own systems
(PLC, Scada).
By means of the CS Soft Basic the data
can be evaluated comfortably.
As an alternative the web server in DS 500
can be addressed via any web browser.
Current measured values and consumption
statistics can be transferred via the web
server.
PLC / Scada
System
왖
왖
왘
왘
RS 485 /
Modbus RTU
Ethernet Modbus TCP
RJ 45
WORLD WIDE WEB
왘
왘
Multifunction