Technical data

37 | DRÄGER GAS DETECTION
ST-9379-2007
Bio-Check F Badges
The Bio-Check F detects formaldehyde in
the range of 0.02 to 0.7 ppm without
mechanical or electronic devices. An
enzyme reaction changes the color of the
indication layer and is evaluated by a color
comparison chart that is included with
the badge. The determination of indoor
air exposure levels can be accomplished
in only two hours. The Bio-Check is small
enough to be worn on a person’s lapel, or
set in a room of concern for measurement
of formaldehyde at these very low levels.
Dräger-Tubes
®
are widely used to measure
the quality of compressed breathing air,
the purity of medical gases, contaminants
in process gases, and impurities in techni-
cal gases. The Aerotest Kits facilitate
these types of measurements by condi-
tioning the pressurized sample to a level at
which the Dräger-Tubes
®
can accurately
operate.
The Dräger Aerotest Kits are designed to
measure the quality of breathing air. The
kits come complete with Dräger-Tubes
®
for measuring CO, CO
2
, oil and water
vapor. The low-pressure (Alpha) version
may be plugged directly into compressed
airlines, while the high-pressure (HP)
version can be connected directly to
SCBA cylinders or compressors.
The Dräger Multi-Test is designed for
medical gases and can measure up to
seven different substances simultaneously;
CO, CO
2
, H
2
O, Oil, SO
2
, H
2
S, and NOx.
DRÄGER AEROTEST KITS
DRÄGER BIO-CHECK F BADGES
ST-394-2007
DRÄGER AEROTEST KITS ORDER INFORMATION
Aerotest Simultan Alpha (< 175 psi) 40 56 747
Aerotest Simultan HP (< 4500 psi) 40 55 986
Aerotest Multi-Test (< 75 psi) 40 56 181
Aerotest Level A (≤ 150 psi) 40 54 001
Aerotest Simultan HP + P Navy (≤ 4500 psi) 65 25 960
Aerotest Simultan Test CO
2
40 56 849
ST-06-2007
ORDER INFORMATION
Bio-Check F Badge 64 00 235