Technical data

DRÄGER GAS DETECTION | 44
DRÄGER INDUSTRIAL SUPPLIED AIR RESPIRATORS
Hard work in an industrial environment requires rugged and reliable equipment. The Dräger
line of supplied air respirators confidently meets this challenge. Our modular airline respirator
systems are based on the Dräger Panorama Nova mask that provides superior fit and com-
fort. The Type C Dräger SAR and constant flow Dräger PentAir
®
respirators are for working
extended periods in non-IDLH environments. The PAS Colt, Supplied Airline Respirator
(Combination Pressure Demand, Type "C") with a 5 or 10-minute self-contained air cylinder
for emergency use, is NIOSH approved for entry and escape, and may be used in the
supplied air mode up to 300 feet or 12 hose length sections from the air source, whichever
is greater.
DRÄGER BG-4 CLOSED CIRCUIT BREATHING APPARATUS (CCBA)
The Dräger BG-4 is a NIOSH & MSHA Approved Closed Circuit Breathing Apparatus
provides superior respiratory protection in IDLH environments for up to 4 hours!
Conventional SCBA’s are limited to just one hour or less and do not provide the extended time
that is required in critical operations like: search and rescue, hazardous materials clean-up,
domestic preparedness, or mine and tunnel rescue. The low profile of the Dräger BG-4
makes it easy to use under protective clothing. Every Dräger BG-4 is equipped with the
Dräger Sentinel, which is an electronic alarm; test and pressure display module that provides
continuous information to the user.
DRÄGER FIRE FIGHTING BREATHING APPARATUS
As the world’s largest SCBA manufacturer, we design SCBAs to withstand the most
demand-ing circumstances while delivering the most safety and comfort. Ergonomic back
plates and fully adjustable harness system, allow the Dräger PSS 3000 and Dräger PSS
5000 to provide exceptional safety, maneuverability, and comfort for fire fighters. The Dräger
PSS SCBA Series has been approved to the most challenging standards in the world, NFPA
1981-2007 edition. Available in both one piece, Evolution backplate as well as the PSS 7000
multi-position backplate, the series utilizes the advanced PSS pneumatic system and
Sentinel 7000 gauge and PASS device.
D-31443-2011
St-384-2007
D-57052-2012
ST-9207-2007
ST-16421-2008
D-25038-2010