User`s guide

ManualsBrandsCSG Security ManualsComputer equipmentNetVision Plus

171

172

173

174

175

176

177

178

179

180

170 Guardall Director V4.74 User's Guide 21-0381E v4.7.4

 Standard 

- Account Name: A name/description

for the site/account.

Tip: This also appears in the 'tree' area.

Account Type

-Intrusion: Systems with monitored

sensors, but no access-controlled

doors;

-Access: Systems with access-

controlled doors, but no monitored

sensors or 'Areas';

-Intrusion and Access: Systems with

both access-controlled doors and

monitored sensors.

-------------------------

-Central Station: Select this if any panel(s) will

be monitored through a central monitoring

facility;

-Suite Security: Systems that include

apartments / facilities being monitored by suite-

security keypads (2-zone or 8-zone);

-LCD Keypads: Systems with any LCD keypad

modules;

-Elevator: Systems with access-controlled

elevators (lifts) and floors.

Panel Mode Information

- Panel Operating Mode: This sets the

basic operating parameters and/or default settings

for the panel (allowing one firmware build to be used

world-wide).

UK/ACPO

(DD243): With UK/ACPO operation, the

modem/dialler may not be available (i.e., older style

main board with built-in bell 103 modem).

Additional Regions

: These selections typically apply

suitable default settings for the specific region.

Changing the Operating Mode

: With Director v4.4,

the panel operating mode is set initially through the

new account wizard. At that time, some default

items/values are set up automatically. If you need to

change the panel operating mode, and wish to obtain

suitable default values, it is best to set up a new

account and delete the old one.

- Language Set: Future Use. This determines

the languages to be supported at LCD keypads.

(The languages will be listed on-screen.)

Feature Set Information

- Panel Version: Set this to match the actual

panel (firmware) revision level for panels

associated with this account (all panels for each

account must be at the same firmware revision

level).

Notes: With Guardall Director v4.4, panel firmware

versions to be supported within an account is set

through the new account wizard. If the panel version

is set incorrectly, you will be unable to communicate

with the panel(s). Panel firmware information can be

found on the system (general) configuration screen

after the 1

communication attempt.

Related Topics:  "System Settings for each Panel"

(in a following section).  "Panel Communications and

Updates" (in a previous section).

Note: Some features may be supported only after

upgrading to the latest firmware revision (typically to

match the software revision).

- Feature Set: (formerly "Memory Model") The

memory configuration to use with all panels

associated with this site/account. This

determines the system capacities for this

account (see "Columns...", to follow).

Suites, Elevators: Support for suite-security keypads

and/or elevator controllers requires a 'feature set'

selection of 5

or higher (via Enterprise software

licensing).

Bell 103 Connections

: For panels that will connect

through their built-in dialler (Bell 103 300 baud

modem), the feature-set must be 1-3 (single panel

system, up to 300 users). This also requires a USR

Sportster 56K modem at the PC (for compatibility with

the initialization string).

-(Columns of items): This shows the system

capacities associated with your selected

"Feature Set".