User`s guide

220 Guardall Director V4.74 User's Guide 21-0381E v4.7.4
Elevator Area: It is best to set up unique area(s) for
use with elevators and the associated access
hallways. This allows the authority to control elevators
and floors to be separated from other features, and
also helps to identify activity/alarm messages
pertaining to elevator readers. (The authority to
control elevators and floors pertains to the "Door
Control" authority selection for the specific area.)
To create a new area, and set up its operating
characteristics, refer to "Areas and Related Settings".
For details on user authorities, refer to "Authorities for
Users/Entrants".
Card Mode
- Schedule, and In / Out of schedule: These
settings specify the basic method required to
satisfy the elevator reader—i.e., present
access token and/or enter a PIN at the
keypad. If scheduled, different access
requirements can be selected for when the
schedule is active versus outside of the
chosen schedule.
UID vs. Card Number: The system can be set to
require a full card number instead of the user-ID
number. (Wherever you see "UID", a card number
would have to be entered instead.)
Related Topic
: Account-Wide Panel Settings (look for
"Setup", and then "User Logon Mode").
Card/PIN
: "Card or PIN" means "Card-Only, or User-
ID+PIN". With "Card+PIN", the card must be
presented (does not allow UID+PIN).
Manual Disarming
: For an armed area that is NOT set
to 'Auto Disarm on Valid Token', the user will also
have to access the alarm system and disarm the area.
For details on the "Auto-Disarm" feature, refer to
"Areas and Related Settings".
Reader Mode
- Schedule, and In / Out of schedule: These
settings specify whether one user can enter,
or if a second valid user (or designated
'escort') will be required to enter their
Card/PIN as well. If scheduled, different entry
requirements can be selected for when the
schedule is active versus outside of the
chosen schedule.
With "Dual Custody", two different users must present
their card and/or PIN (and neither of them can be set
as "Visitor--Escort Required").
When set to "Escort
", a valid 'escort' can also enter on
their own by presenting their card/PIN twice. If visitor
cards (set to require an escort) are presented, visitor
escort processing will take over (e.g., with visitor
processing, you can set the type of cards escorts can
use). Users are defined as escorts (escort privilege)
through their authority assignments.
Related Topics
:
 Authorities, Profile 1-4, Access,
Escort Privilege, and Visitor (Escort Required).
See
: Authorities for Users / Entrants.
 Type of Cards that can Escort Visitors
: Under
"Account-Wide Panel Settings", look for "Setup",
then "Escort-Required Mode".
 Dual custody is also supported pertaining to the
disarming of an area. For details, refer to "Areas
and Related Settings".
Lockout
- Schedule and Mode: These settings specify
whether all users are to be denied access
either while a selected schedule is active, or
outside of the chosen schedule. Tip: To
disable this feature, select "None" for the
schedule.
Users with 'Master Override' authority can access
floors while a 'lockout' is in effect. For details refer to
the "Master Override" setting under "Authorities for
Users/Entrants".
Miscellaneous
- Enable Class Checking:
Selected (): This selection is required if user-
access to this reader is to be controlled based on
time of day and/or door class. See [Class Map] to
follow/below. Not Selected
: Provides 24-hr access
to the user's assigned floors (ignores the users'
assigned schedule and door class authorities).
[Class Map]
- Schedule, In / Out of schedule, and Class
A/B/C: These settings allow restricting
access to only the users with specific door-
class authority, and/or optionally blocking
after-hours access to this specific reader
(except users with 'Master Override'
authority). If scheduled, a different set of
door-class requirements can be selected for
when the schedule is active versus outside of
the chosen schedule.
To block after-hours access to this reader, select "Out
of Schedule" None. To remove class restrictions at
this reader (without bypassing each user's assigned
schedule), select A, B, C for both "In Schedule"
and "Out of Schedule".
Related Settings
:
 User's door-class authorities and scheduling are set
under: Authorities, Profile 1-4, Door
Class. See: Authorities for Users / Entrants.
- Group Number: Similar to 'Door Class'.
Each reader can be assigned a value here.
Users can access floors through this elevator