User`s guide
232 Guardall Director V4.74 User's Guide 21-0381E v4.7.4
The Numeric Paging Feature
UK/ACPO: This feature is not supported
with UK/ACPO operation.
Also See
: [Management], Serial
Reporting.
Software-Based Text Paging (Serial
Reporting)
Outputs 5-8, or 5-8 & 121-128 (see
exception)
can be set to signal a
numeric pager when triggered by
their associated alarm condition.
Exception: Beginning with V4.4 (software
and firmware), the outputs to use for numeric
paging are configurable.
Related
: Configuration, System, I/O Mapping
I/O Mapping (under "General System Settings
for a Panel").
Outputs 005 - 008
: These are 'virtual' outputs that are
not associated with any physical wiring).
The specific alarm/event to be associated with
each of the outputs is defined here, while other
settings for the paging feature are set through
the System Communication screen.
For details,
refer to "Monitoring, Paging, & Remote Mgt. Settings".
Parallel STU / REDCARE and VBUS
Outputs
Outputs pertaining to a Subscriber Terminal
Unit (STU) interface (and also regarding VBUS
operations) need to be reserved ahead of time.
Select Outputs: Configuration, System, I/O
Mapping ; I/O Mapping (under "General
System Settings...", previous).
How to Get Here
Multi-Account Systems: First select [Account Folders]
in the 'tree', and locate and double-click the desired
account.
MyTools Bar: Output Points
In the Tree
: Configuration (click the "+"),
Output Points
(Under the specific panel group and
panel--if listed in the 'tree'.)
Related Topic: "Other Desktop Choices"
Tip: The Grid / Form toolbar-button allows selecting
your preferred view-mode (forms view is recommended
here).
Things You Can Do
Add an Output Point: Click [+] at the
bottom of the form, or right-click the form and
select Add New from the pop-up menu.
View/Change an Existing One: Select one
from the pop-up list at the bottom of the
form.
Search for An Output Point: Click the
'binoculars' symbol. Then, enter the name
and click [Find].
Tip: You can search by name or the 1
st
few
characters--e.g., nam*
Delete an Output Point: Right-click a blank
area on the form (
If grid view: Right-click the
item in the list
), and select "Delete". When
prompted to confirm, select Yes.
Working in Grid View: You can: View or enter values;
Right-click an item and select from the pop-up menu;
Click a column heading to sort on that column.
(Filter on Column: Shows only items matching an
entered value or 1
st
few chars.--e.g., nam*. A red
column heading indicates the list is filtered.)
Pick-Lists (bottom of the form)
-Panel Group & Panel references (optional): This is
where you select a specific panel-group and panel
in a multi-panel system where the 'tree' is not
set to
show items on a panel-by-panel basis. For more
information on this feature, refer to "Other Desktop
Choices".
- Output Point: This is where you select a device
(output point) to view or edit. This area shows a
Configuration Output Points