User`s guide

21-0381E v4.7.4
Welcome Report Control Admin Sys Config
Tech-Ref
255
Upgrading Your Software (Adding Optional Features)
To enable the upgraded functionality, you will need to register your system and obtain a new
validation key number. The following registration procedures are available with Director
Version 4. NOTE: This process must be repeated for each feature added.
 After the Director program has been installed, run the version 4 License Manager program
(Director Server PC if client-server):
[Start]  Programs  Guardall Director  Guardall Director – License Manager.
 This Information screen will appear displaying your current system settings.
 Click [Upgrade System] at the bottom of this screen.
 The Upgrade screen will now display.
 Enter the 15-character option number provided with your software upgrade, in groups of 5, in the
“Option” boxes supplied.
If you HAVE Access to the Internet on
This PC
 If the PC you are working from has Internet
Access, select:
 Press the “Next” button at the bottom of this
screen. The License Manager will connect with
the Licensing Server to register your upgrade.
After a few minutes, a message should appear
that the procedure was successful and your 30
character, validation Key number will be
automatically changed.
 Press the “Done” button at the bottom of this
screen.
 The Information screen will display again with
your new option enabled.
You can now exit License Mgr. and operate the
Director normally.
If you Have Access to the Internet from a
Different PC Only
 If you do not have access to the Internet on the
Director PC, after entering the option number
in the License Mgr’s Upgrade screen, select:
and press
“Next”.
 Follow the information that is displayed
regarding using the “License Agent” on the v4
Director’s installation CD on another PC with
Internet access to obtain a validation key
number.