User`s guide

278 Guardall Director V4.74 User's Guide 21-0381E v4.7.4
3) Set these items under "Account
Information":  Account Name;
 Account Type;  Panel Operating Mode;
 Panel Version;  Feature Set.
"Account-Wide Panel Settings..."
For system security, you may also wish to change the default 'service PIN'.
Tip: Be sure to log the new Service PIN somewhere, and/or select one that is easy to remember.
4) Rename the default 'Panel Group' and Panel
name if desired, or set up new ones as
required for additional panels.
"Panels, Panel Groups, and
Related Settings"
Tip: You can leave any panel communications settings as-is for now.
5) If the site includes access-controlled doors
and/or elevators, be sure to specify the format
of the access cards/tokens.
"System Card-Access Settings"
6) If you wish to initially test any scheduling
features, be sure to create at least one
schedule for testing purposes.
"Schedules for User-Access and Area
Automation"
7) Ensure at least one "Area" has been set up to
allow testing your initial basic configuration.
"Areas and Related Settings"
8) Ensure one sample user "Authority Level" is
available to allow testing access-control and
other user-related features.
"Authorities for Users/Entrants"
9) Define one system "User" (with sample access
card/token) to allow testing access-control and
other user-related features.
"Users (Entrants / Panel Users)"
10) From the installed devices, select one LCD
keypad module, one door controller module (if
applicable), and one point expansion module,
and define these items through the software.
"Modules (PODs)"
11) Similarly, select 1 - 3 doors, and monitored
sensors, and create entries for these items.
"Doors, Readers, and Related
Settings", and "Input Points—
Monitored Sensors".
12) Select which system (equipment) conditions
are to be monitored or ignored.
Tip: This helps to avoid unnecessary signalling at
area keypads.
"Equipment Settings
(Pseudo / Internal Inputs)".
Settings Required for Panel Communications
Step (Do This): For details, refer to:
13) Set up all items as required for connecting
with the panel.
"Panel Connection Overview"