User`s guide

21-0381E v4.7.4
Welcome Report
Control Admin Sys Config Tech-Ref
63
Camera-View. Then, set the name
as desired (see the name description
for details).
Step 2: Set up Views
"Views" are definable layouts for
maps and camera images. These
must be set up to allow viewing maps
and/or cameras.
Topic Locator:
MyTools Bar: Customize Views, and
(login with a user
name & ID if needed).
In the Tree: Click your site/account
button in the tree, open Control &
Status, and Panel Control & Status
(click the "+"), and login with your user
ID and PIN if prompted for this. Then,
select: "Visual Director" (click the "+"),
Customize Views.
Multi-Account Systems: First select
[Account Folders] in the 'tree', and double-
click the desired account.
Tip: For additional space, it's a good idea to
turn off the event/monitoring window when
setting up 'Views'. (Click [Events] on the
main toolbar.)
-------------------------
Creating a New View: Click [+] at
the bottom of the form, or right-click
the form, and select Add New View
from the pop-up menu.
Alternative: You can
also select "New View" from the list (bottom of the
window).
Changing an Existing View: Select the
desired "View" from the pop-up list at the
bottom of the window.
Searching for an Existing View: Click the
'binoculars' symbol. Then, enter the name
(or the first few characters + "*" ), and click
[Find].
Then, refer to the selection-descriptions for
this screen while viewing or changing
settings as desired.
To Copy an Entire View: Right-click, "Copy View";
right-click, "Add New View"; right-click, "Paste View".
Then, change the name and other items as desired.
If you Need to Delete a View
: Right-click a blank
area on the view, and select "Delete View".
Visual Director Customize Views
Camera-Views 
- [Add]: Allows creating a new camera-view.
- [Delete]: Allows deleting an existing camera-view.
After Right-clicking an Existing Camera-View in
the List
- Add New Camera-View: Allows creating a new camera-view
(same as clicking the [Add] button).
- Edit Camera-View: Allows changing the name for a camera-
view that was defined previously.
- Delete Camera-View: Allows deleting an existing camera-
view.
Notice: This will disable the event-triggered camera display feature
for any doors and input points that are using this camera-view.
Visual Director Customize Views Camera-
Views [Add]
(or right-click one in the list and select
"Edit Camera-View")
- Name: Enter a suitable name for the camera-view. This will
pertain to your specific needs and preferences (e.g., Doors,
Motion-Detectors, Sensors in Area X, Button ABC pressed,
etc.).